Parts and Part Out

[PEB]

I have a bunch of parts sitting around plus a pampered 02 that I am going to part out. Most parts are OBO but I am not doing this to play Santa I will setup a paypall account or take Cashiers checks. I will keep this post udated as things get sold. Pics available on request but remember I am somewhat of a Digital retard, I still can't figure out how to post pics in the Gallery


Paypal to Paul Bryant(pevanbryant@verizon.net) or checks to Paul Bryant, 2218 Baker Ave, Everett WA 98201



Available now

Power Mad H guards- $5

Moose bark busters(needs bar clamps) -$15

46mm LTR valved Ohlins. New seals and fluid in May, one base valve has been filed down to a 16mm but is perfectly functional and I will include another set of base valves plus OEm clamps and stem- $650

Ohlins Ltr valved shock, rebuilt in May- $250

U shaped DID dirt star gold anodized rims, in nice shape includes well used rotors and spacers, very few scrapes for their age $650



Front brake System, with newer braided line $100


Clutch master and slave $75

Swingarm and linkage $125

Large ignition $100

Reed Block Spacer $10


SE spec 250 cdi( red shrink wrap) $125


Cases will small crack on shift drum bearing shoulder $50

KNight RAcing MX chain guide adapter- This is a nice billet pice that uses a chain guide strikingly similar to an xr piece. I'm quite sure someone even remotely handy could use this piece to run a different chain guide. Comes with a worn oem chain guide-$20



Things not listed Make an offer,

Paul B

 

[Loosenut]

I take the clutch master and slave!

 

[GAKLX]

parts

dibs on the $20.00 skid plate.

 

[PEB]

Mike- As soon as one or more of the high dollar items sells the clutch system is yours. I'll ship for free and throw in a lever(needs new bushings)in return for those base valve you sent me.

Gaklx-The skid plate is yours pending payment, I better dig up the mounts.

 

[Bearman]

Hey Paul,

How much would it cost to have the LTR PowerVale Cover shipped to the bottom of Australia? I've been chasing one of these for a while now but couldn't afford the shipping I was being quoted. I'd dearly love to buy it from you.

I've got an '03 200, but it should fit yeah?

Thanks in advance mate

Ben

 

[2 strokes 4 life]

I wish i had a couple hundo to spend right now. What kind of shape are the rads in? How much if in good shape? Also, dose the carb have LTR mods of just a power ring? THANKS!!!

 

[JEEPUSAURUS]

Frame

Do you have a title for the frame?, If so i would be interested, Also interested in the Doma pipe, Hyde skid plate, Red Plastic, Steering Damper, Subframe, and do you have a kickstand?

Thanks,

 

[Pete406]

I'm interested in the top end.

 

[PEB]

Ben- At 6:59 GGNoob calimed the hyde plate and LTR cover via PM, sorry, and yes it would have fit your 200.

Jeepasaurus- I have a title for the frame but it clearly states for offroad use only. The Hyde plate is allready spoken for. The damper need parts from a rebuild kit to function, no kickstand.

Pete406- Shoot me an offer or questions about the topend.

I have updated the list with what parts are spoken for and with my paypal info(I hope I have it right)

As soon as stuff is paid for I will remove it from the list. Those off you wanting stuff off the part out it will likely be at least a week before my arm will be up to tearing a bike apart and I sure wish I had a firm commitment for one of the big ticket items before I render the bike useless by selling a crucial part.

 

[PEB]

2 Stroke- Sorry I missed your message, The radiators are in fine shape with one side nearly pristine the other a little crunched but not bad at all, I ran it like that for several years. I'd let them go for around $100.

The carb has an LTR needle and the power now inlet wing.


Remember Paypal would gladly take your credit card or your dad's for that matter if you wanted the the Ohlins or the rims for your ride( A little jab back at you for thinking my crash was funny, which it was)

 

[sholley1]

I will take the seat if still available

 

[SpeedyManiac]

If the 06 Doma pipe will fit (and work) on an 01 EC200 I'll take it.

 

[Bearman]

Thats fine Paul, thanks anyway mate. Ill keep an eye out for another one.

Cheers

 

[2 strokes 4 life]

If the 06 Doma pipe will fit (and work) on an 01 EC200 I'll take it.

I have a 06 FMF Gnarly on my 02 EC250. I think it should work for you.

 

[PEB]

Sholly- The seat is yours you will like it.

Speedy- The pipe is yours, I think it should fit and someone just made a post saying the 200 runs good with a 250/300 pipe. Refer to 1st post for new descrition of pipe and new price.

All parts are now available, though the high $ items have not sold yet it's full speed ahead with the part out.

 

[SpeedyManiac]

Could you email me a picture of the pipe? I want to make sure the neck of the pipe is not kinked where it comes out of the cylinder (this is where I wreck pipes). My email is speedymaniac(at)gmail.com.

Thanks.

 

[dave948]

I wish you hadn't listed the motor and the rims for the same price.

Now what do I need more a spare 300 for my 250 or a set of rims to put snow tires on....

I'll get back to you.... soon. (I'm thinking rims)

 

[PEB]

Dave, I was a little sad tearing parts off the bike last night, I put some epic miles on that bike. I will likely get a little weepy when the rims go, they are sweet(If they were silver they would replace the nice Dirtstar U's that came on my 07). I can take some pics if you want them. Make an offer on the top end and the rims. I wouldn't mind tearing the motor down.

 

[PEB]

All parts available that are still listed, paypal is up and confirmed funtional. I have shipped numerous boxes and am ready to ship a bunch more!

Paul

 

[jefgil123]

Is the stock pipe still avail ? Is it a little bent, or what kind of shape?

Jeff in Tahoe.