nambo-trev
New member
hello gents, i need a whole new clutch assembly, i keep blowing plates and everything looks fine so i just want to replace the whole issue. let me know what you have
new clutch and basket!!
- Thread starter nambo-trev
- Start date
nambo-trev
New member
all good boys GASGAS360 helped me out and had a full rekluse core manual clutch he just sold me. thanks bro!!!
nambo-trev
New member
Roger that jake, just gotta order the rekluse clutch basket today then hopefully overhaul next week.
Fred1956
New member
Trev- make sure you measure your old basket before you order, two different ones available and if they send you the 'common' one and you have the 'uncommon' one (like mine was) either you'll have to have it machined or send it back to them...If you know ahead of time they'll machine it for you...way simpler
nambo-trev
New member
Wow really? Does that go for all baskets(Barnett Hinson etc?) that seems crazy that there is 2 different sizes! Did you go with the rekluse basket Fred? How exactly didn't it fit?
Fred1956
New member
The center of the common basket has a smaller hole than the uncommon one. Rekluse makes all their baskets with the smaller hole and then machines it larger as needed. This has been covered before in other threads as well but I just wanted to remind you Here is the link to the instructions from Rekluse
http://rekluse.com/NPDLC/1XX-XXX/19...0)/193-705A_Read Me First - GasGas Basket.pdf
nambo-trev
New member
Thanks Fred that was a big help. I've got access to a machine shop so ill just order it but at least I have the heads up!
desertgasser300
Banned
Congrats, full on Rekluse is the way to go. It is beautiful stuff.
Did you find it on there website?
nambo-trev
New member
No I got the core manual clutch from gasgas360 and ordered the basket and rekluse fibre plates from gnarlyparts up here in Canada. I was just so sick of having clutch problems a whole overhaul sounded like the way to go. Maybe I'll keep it for another year if I do the estart too as that's a lot of coin to only use it for half a year
StuJohnson
New member
Not to rain on your parade.
But if you have the smaller diameter hole basket and you get the larger Rekluse diameter one you won't be needing a machine shop...........
nambo-trev
New member
Judging by what the instructions say they all come as the smaller one, you change it if need be the only variable is the ring gear(weird)
StuJohnson
New member
That's good.
When I ordered mine from Rekluse they would not send it to me until I actually measured my old one.
I am sure you will be fine.
When I ordered mine from Rekluse they would not send it to me until I actually measured my old one.
I am sure you will be fine.
nambo-trev
New member
Mine is 2 weeks out they said. None in Canada and only 5 in the states!
Fred1956
New member
Exactly.......and if you measure it before you order, they'll machine it for free.. Yes it is weird but it is "one of those GasGas things"
nambo-trev
New member
Bought the clutch basket from mark because he could get it to me faster than the local dealer at the same cost! I know sometimes prices fluctuate but man do I ever get good service and parts availability from gofasters. My local bike shop can't do what he helps me with so thanks mark!
Fred1956
New member
There ya go!
nambo-trev
New member
Hey guys can anyone with a core manual tell me if the aftermarket throw out had a snap ring where it centres on the pressure plate??? Got it all together and didn't remeber seeing a groove at the end of the aftermarket rekluse throw out????
nambo-trev
New member
On another note the kit is super slick, my stock ring gear was the right fitment for the new clutch basket. I had some serious wear on the oem basket no doubt the reason why I was going threw fibers so often. Anyway here's a few pics of the install.
If you look at the last pic you can see there is no room on the throw out for a snap ring because it is flush to the pressure plate. Was this others experience as well?
If you look at the last pic you can see there is no room on the throw out for a snap ring because it is flush to the pressure plate. Was this others experience as well?
Vindicator
New member
Could you please post some pics of the OEM basket wear ?
