2013 300XC Sub Frame

[john r b]

Well this is depressing, Motocrosscenter has told me the cost of the alu.
subframe ouch 250 euros and not in stock

 

[nambo-trev]

I have a request in to Greenlandmx.com also. I'm tempted to send an email to GasGas Spain? I have before and they responded very well.

We've gotten parts from Greenlandmx faster than from the USA in Canada. It took about 5 days last time we ordered and awesome service.

 

[GMP]

Got the same email from Mikel. Figured as much. Probably no $$ to make spares, all going to '14s, or most '14s.

 

[Moto7man]

Well this is depressing, Motocrosscenter has told me the cost of the alu.
subframe ouch 250 euros and not in stock

Thats about 324 USD. Is that with or without the VAT?

 

[GMP]

I think all their prices include the VAT. BUT, you need all the other parts to go with it, and in the case of an upgrade from a '12, a seat, inner fender, and side panels. Doesn't matter if its $324 or $32.24 if you can't get it.

 

[Moto7man]

You have to make sure to remind them to exclude the VAT. Usually, they exclude it automatically. Countries outside the EU, such as the USA, are no subject to the VAT charge. The VAT is like 18%, so if the price of the subframe included VAT that is a big difference. On the Motocross Center Webpage you will see a price listed for the item, underneath that price you will see a lesser price with the VAT excluded. That is the price for the non EU consumers.

 

[GMP]

OK, thanks for the heads up, never ordered from them. I asked for a quote for everything to the US including shipping, but got that price for only the subframe with a not available status.

 

[Moto7man]

No problem.

 

[john r b]

You have to make sure to remind them to exclude the VAT. Usually, they exclude it automatically. Countries outside the EU, such as the USA, are no subject to the VAT charge. The VAT is like 18%, so if the price of the subframe included VAT that is a big difference. On the Motocross Center Webpage you will see a price listed for the item, underneath that price you will see a lesser price with the VAT excluded. That is the price for the non EU consumers.

Thanks for the heads up Moto7man, next time I speak w/ Mikel I will ask.

 

[Vindicator]

We've gotten parts from Greenlandmx faster than from the USA in Canada. It took about 5 days last time we ordered and awesome service.

+1

Usually takes 2 days to receive my orders .

 

[Vindicator]

Thanks for the heads up Moto7man, next time I speak w/ Mikel I will ask.

Spanish VAT is 21% . In a big order might pay for the shipment .

 

[john r b]

Ouch!!!!!!

 

[GMP]

Just got a reply that the alloy subframe is now available. I'd have to figure out exactly what I need to put it on a '12 though. May have a buyer for my bike so I'll hold off for a bit.

 

[john r b]

GMP, are you jumping ship???

 

[nambo-trev]

Just got a reply that the alloy subframe is now available. I'd have to figure out exactly what I need to put it on a '12 though. May have a buyer for my bike so I'll hold off for a bit.

Can't wait too here your report on the beta

 

[nick H]

I would check out the tm as well one lined up next to me sun and it looked pretty nice but small gas tank but same problem with the beta

 

[nambo-trev]

I've always wanted to try a tm too and I here are Canadian importer is quite good

 

[GMP]

No new bike for awhile can't afford it. If I can sell my '12 while its in great shape, my '07. and all my spares, I'll be that much closer though. I have a few ideas but first choice is call it a day here.

 

[nambo-trev]

That's really too bad it turned out that way for you Glenn, I remember how pumped you were when the bike was on its way and for it to turn out this way is a huge bumber

 

[john r b]

I was looking very hard @ TM before changing my mind to GG I'm starting to wonder!!!