Hi. I made new starter gear and one way clutch bearing to my Gas Gas 450 fse 2003.
For modification I used:
Yamaha Majesty 400 starter gear- cut new gear teeth on CNC milling machine
Suzuki DRZ one way clutch bearing
GasGas original bearing race-original size inside 62mm -drill to size 62,20mm and drill a small groove deep 2mm
For modification I used:
Yamaha Majesty 400 starter gear- cut new gear teeth on CNC milling machine
Suzuki DRZ one way clutch bearing
GasGas original bearing race-original size inside 62mm -drill to size 62,20mm and drill a small groove deep 2mm