The Nambotin Replica 2010 Thread

[nambo-trev]

yup im in prince edward island this week but ill call when i get home. do you know what race sag your trying to achieve? im not sure whats common with gasgas as its my first one. i ran 110 race sag on my crf450x but this really is irelavent to this bike.

 

[cutoff]

Did your RPM/hour meter works on your Nambo ?

 

[nambo-trev]

yup it works fine,why whats up with yours?

 

[cutoff]

Out of the computer there is 4 wire, only 2 are used: power and the input from the front wheel. Where the 2 others are supposed to connect? Looks like something is missing.

 

[nambo-trev]

well im in prince edward island this week but get back on friday so ill check the wiring and let you know on saturday what i find out. im sure its nothing we cant fix!

 

[Kurdt]

I'm looking to get about 105mm Race sag and 25mm Static Sag. Thanks for your help.

 

[aflica]

The computer on the Gas Gas's is a Trail Tech Vapor. The other 2 wires are optional hook ups for RPM and a engine water temp sensor. Both of these can be bought directly from Trail Tech , or ordered from a Trail Tech Dealer

 

[nambo-trev]

hey kurdt i havnt talk to the ohins rep but i know the spring in the back is 5.3kg, if your topped out trying to achieve your sag just from the chart i have for a 5.1kg spring youll need 10-09/50 L449 or the next step might be 2 light its a 4.89kg/mm and its a 10-08/48 L449. ill still give him a shout this monday and ask but when your loaded with gear can you get close to 105mm?

 

[Kurdt]

hey kurdt i havnt talk to the ohins rep but i know the spring in the back is 5.3kg, if your topped out trying to achieve your sag just from the chart i have for a 5.1kg spring youll need 10-09/50 L449 or the next step might be 2 light its a 4.89kg/mm and its a 10-08/48 L449. ill still give him a shout this monday and ask but when your loaded with gear can you get close to 105mm?

I'm thinking I'll need the 4.89kg/mm. I'd like to be right in the middle of preload adjustment, so I have the room to go either way.

 

[nambo-trev]

ya if your that far out on a 5.3kg and cant get close then ii would definetly go two sizes down

 

[nambo-trev]

just a quick update on a few things i added yesterday. i put concept 1 cycra handguards on with bike bonz mounts, added fastway F6 pegs and mounted my ram mount GPS holder to the bike bonz mount. heres a few pics.

 

[PEB]

Based on the way that Hyde looks like it fits it looks like the pipe is quite different fronm the older ones. The peg mounts look way beefier as well. Nice bike, I 'd love to ride it back to back with my 07.

 

[aflica]

PEB , The pipe on the 2010's is way different than 09's and earlier , they tightened up the curl to increase ground clearance

Nambo-Trev , i see you didnt put on the front fender brace that came with the bike , just wondering why ?
I too changed my foot pegs , after slightly rearranging the shape of one on a rock , but i went with the Moose Stainless

 

[nambo-trev]

ya funny you noticed the front fender brace, i didnt notice it tell my buddy pointed it out to me when i got it home.phoned the dealer and there looking into it. dealer put a kill switch on for me though. how do you like the moose pegs? the factory ones to me were no good.

 

[cutoff]

Great goodies you got there, your bike looks ready to been thrown in some rough stuff. What is the purpose of those Bonz mounts, are they raisers?
GasGas aftermarket parts are hard to find, I ordered a skid plate and a rad cage from Scorpion, excellent service and it's canadian made! I installed the IMS Pros foot peg from my old Yamy,they have a got bite, but they bent easily. I choose the P3 pipe guard, they have the 250 ready, suppose to fit the 300. But I'm still looking to find a rear disk guard, do you know a brand for the GasGas?

 

[dgstandard]

But I'm still looking to find a rear disk guard, do you know a brand for the GasGas?

Enduro Engineering is developing one and should be out soon, if not already.

 

[nambo-trev]

the purpose of the bike bonz mounts is having a solid mount for the handguards instead of the standard clamp on the bar mounts. ive never had a bar mounted handguard that didnt twist or break or move and the "bonz" eliminate that all together. some dont need them im sure but from some of the impacts ive sustained there is no substitute for these. ya for the rear shark fin id go with EE good stuff for sure!

 

[dgstandard]

My berg needs some bonz

 

[nambo-trev]

good call DG thats exactly what im used 2 almost every second ride until the bonz came along! never happened since. good pic!

 

[cutoff]

Wow! awesome background. The bike looks strange...The drive train on the right side, cool.